CLR 1337 / CLH 5515

Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1337 / CLH 5515

CLR 1396 / CLH 6930

Extremely strong adhesive. Remains strong at elevated temperatures. A high performance, room temperature curing, 100% solids, epoxy adhesive. This product bonds to a wide variety of substrates and was specifically developed to seal porous metal substrates. CLR 1396 / CLH 6930

CLR 1625 / CLH 6330

General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Its low viscosity gives the system excellent wet -out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. For a faster system use hardener CLH 6333. CLR 1625 / CLH 6330

CLR 1625 / CLH 6333

General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. CLR 1625 / CLH 6333

CLR 1730 / CLH 6372

Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372

CLR 1796 / CLH 6580

UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580

CLR 1876 / CLH 6631

Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631

CLR 3080 / CLH 6372

General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372

CLS 9600

High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600

XR 52092 / XH 62093

1:1 machine dispense adhesive. Adhesive for bonding synthetic aggregates to metal. A medium viscosity, room temperature curing, two component epoxy adhesive. Product was developed with improved thin film set time when bonding metal substrates. XR 52092 / XH 62093

XRD 1014 / XHD 1015

High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

XRD 1321 / CLH 5185

Machine dispense friendly, tough, casting epoxy system. Increased flexibility when compared to CLR 1831 family. A two component, low stress, heat cure epoxy system specifically developed for use on instrument and power transformers. The product if filled with non-abrasive fillers, making the product suitable for machine dispensing. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. XRD 1321 / CLH 5185